Diode Hair Removal has proven successful in the treatment of Hair Reduction over three decades. Compared to the other technologies which have variable effectiveness on resistant hair, fine hair, growing hair, light and blond hair; the diodes have a better success rate. The diode is also recommended because of its versatility for operative options like pulse-by-pulse operation or operating continuously in motion. Most of the diodes offer 10Hz speed which reduces the session time and makes it easier for the treatment operators. It is possible to configure diodes to deliver 1 single wavelength or multiple wavelengths in one single shot and at the same time.
Dhanussh is 2400w system, designed & Made in India to minimize treatment time, patient safety, operator comfort, and ease of operation along with superior results.
Indications - Permanent laser hair reduction (All skin types)
The technology used in Dhanussh is triple-wavelength US FDA-approved diodes that emit 755nm, 808nm, 1064nm wavelengths in each shot. Dhanussh has 1600w capacity which is emitted at 20Hz speed for body areas and up to 3Hz on the face and more fragile areas. 20Hz Speed & the lightest weight Handle in the industry make it the most preferred Diode laser by treatment providers.
Cooling Technology : Dhanussh offers enhanced patient safety and enhanced machine life with its Triple Cooling System - the Peltier, The Thermo Electric Conduction & Air Cooling.
“Dhanush” by beagle lasers is a triple wavelength diode hair removal laser. It delivers 3 wavelengths of light in a single pulse and pulse duration to a specific target.
The selective photo-thermolysis principle. The energy of the laser is preferentially absorbed by the melanin in the hair, effectively destroying the hair follicle and hair shaft without injury to the surrounding tissues.
With each ongoing treatment, the actively growing hair follicle is destroyed so that the hair loss regeneration ability and the new growth is delayed and slowed down.
With each treatment, hair turns lighter and thinner and its depth is reduced. The melanin pigment is reduced. To maintain the efficiency with subsequent treatments, triple - wavelength is used.
With the use of 3 different wavelengths in each pulse helps to accumulate the energy at different layers. Shorter wavelengths are warmer and that helps to treat lightly pigmented hair which is seen with the subsequent treatments.
The use of 4th wavelength 940nm/980nm is avoided in Dhanussh because of its high absorption in Haemoglobin and hence dilutes the results
*808nm - Moderate melanin absorption
Used for areas such as arms, legs, and cheeks
*755nm - wavelength targets the bulb of the hair follicle
For superficially embedded hair such as eyebrows and upper lip
*1064nm - deepest penetration of hair follicle (bulb & papilla)
Treats deeply embedded hair such as armpits and pubic areas
Dhanussh uses an intelligent user interface, it is simple and easy to use. The user interface offers three modes of operation :
SHR Mode - It is mainly configured with auto calibrations for treating larger body areas like Hands, Legs, Back, Thighs, Chest, Abdomen, etc.
HR Mode - It is mainly configured for the treatment of more delicate and sensitive areas like the face, peri ocular, pre-auricular, ears, nose, eyebrows, pubic area, and vulvar areas. It offers ease of calibration and safety settings by the operator before starting the treatments. The speed is restricted and more flexibility in choosing between pulse-by-pulse operation or slow-in-motion technique.
Staking Mode - It is designed to be used by physicians and nurses who are dealing with specific conditions like growing hair, hair situated at most abnormal locations, and highly stubborn cases of hirsutism, etc.
Dhanussh offers one of the lightest weight delivery handle. The lightweight, easy ergonomic design reduces weight and operator fatigue. The handle is easily movable for in-motion treatment mode. The 20Hz speed is enough to complete full body treatment in less than 90 minutes.
Dhanussh uses a Peltier cooling system in synchronization with Thermo-Electric conduction and Air cooling to maintain consistent skin temperature at 4 Degrees throughout the treatment which supports the optimum consistency and effectiveness of each treatment. Dhanussh is designed to maintain an overall machine temperature under 26 degrees throughout
Dhanussh is uniquely designed to give safety, durability, style, and ease of operations. It is proudly designed and engineered in India by Beagle Laser Engineers. The design offers great stability and Safety. The Design of Dhanussh protects from electric instability, Ground Current Inconsistencies, Earth Leaks, and Mechatronic Failures. Dhanussh offers ease of movement from one treatment room to another, handling in between treatments, ease of disinfecting the probes before treatment, etc. Dhanussh is easy to maintain and just with minimum preventive maintenance, it offers trouble trouble-free long life
Dhanussh offers a warranty of 1 year or 30 million diode shots whichever is earlier. Under the warranty, the company warrants the malfunctioning or manufacturing defects and offers free-of-cost breakdown attendance and repair at the site and free replacement of parts during the warranty.
Dhanussh offers easy preventive maintenance to their users which can be renewed annually at a nominal price. This can be renewed at one click on www.beaglelasers.com
1 | Technology | Diode Laser |
2 | Wavelength | Triple wavelength (755nm, 808nm, 1064nm) |
3 | Total Power | 1600wt for Diodes, 2400wt system power supply |
4 | Spot Size | Large spot : 26x12mm & Small spot : 8x8mm |
5 | Pulse Duration | 5ms-400ms |
6 | Frequency | 1-20Hz |
7 | Cooling System | Air Cooling, TEC, Sapphire Peltier |
8 | No of Pulse | 30 million |
9 | Screen Size | 10.5 inch LCD |
10 | Power Supply | 110-240v/ 50-60 Hz |
11 | Gross Weight | 35Kg |